# In this topic i made a quick guide to update your fuel node in case you don't know how to set the right commands **URL:** \ **Category:** General\ **Tags:** testnet, feedback, faqs, tutorials\ **Created:** [September 9, 2024, 8:55pm UTC](https://forum.fuel.network/t/in-this-topic-i-made-a-quick-guide-to-update-your-fuel-node-in-case-you-dont-know-how-to-set-the-right-commands/6588 "2024-09-09T20:55:28Z")\ **Posts on this page:** 1\ **Page:** 1
**Author:** ![Overbafer999](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.fuel.network/overbafer999/32/3547_2.png) [@Overbafer999](https://forum.fuel.network/u/Overbafer999)\ **Post date:** [September 9, 2024, 8:55pm UTC](https://forum.fuel.network/t/in-this-topic-i-made-a-quick-guide-to-update-your-fuel-node-in-case-you-dont-know-how-to-set-the-right-commands/6588/1 "2024-09-09T20:55:28Z")
First connect to your vps. Commands - 1 - source /root/.bashrc 2-fuelup self update fuelup update fuelup default latest (you can copy all 3 commands and paste in your terminal,when update will be done you will see this ) ![image](https://us1.discourse-cdn.com/flex022/uploads/fuel/original/2X/b/b787eba607ac58c87a8aca71eee5a8b0da92e17d.png) Then copy and paste those commands sudo systemctl daemon-reload sudo systemctl enable fueld sudo systemctl start fueld sudo systemctl status fueld.service You will see this (fueld.service-Fuel node sepolia ) Check punct active - make sure its showed green active running ,after check your logs with command - sudo journalctl -u fueld -f -o cat (if logs showed okay your node is successfully updated and running )